Video clip list

[STOP] [PLAY]
[continue LL-41 presentation]

Instruction about how to use YouTube video player:

To start video press play button.

To navigate between video clips in one video player

move the cursor over the video at the bottom

and pick other video icon or press Left/Right arrows.

You can download videos from our website too.

Links to downloadable video clips are located in right column.

video	description
4 operations on 1 lathe (sequence of 4 video clips) (To navigate between video clips in the video player move the cursor to the bottom edge of the video and pick other video icon or press Left/Right arrows)	These are 4 video clips demonstrating four essential operations which can be made on the log using the LL-41 log lathe. After the log has been fixed between front and rear stocks rough cutter can debark the log. It may remove up to 70mm per diameter. If log has irregular shape rough cutter should be used few times to remove all bark and bring log diameter to proper size. Then fine cutter should smooth surface of the log. Fine cutter can work simultaneously with rough cutter. Next operation is milling of long groove (Swedish cope). This can be done simultaneously with kerfing. Notching is a final operation. You can download these clips to your computer from here: 1. Log turning (5.9 Mb) 2. Milling of Swedish cope (1.3 Mb) 3. Notching (1.2 Mb) 4. Kerfing (1.7 Mb)

Turning of 2 meter green poplar log video clips (sequence of 5 video clips) (To navigate between video clips in the video player move the cursor to the bottom edge of the video and pick other video icon or press Left/Right arrows)	1st video clip demonstrates loading of a log on the lathe Sequence of operations: 1. Tail stock is being moved to fit log size; 2. Log is rolled to lathe frame and put on log lifting bars; 3. Using manual hydraulic jacks the operator lifted the log to level of stock pikes; 4. Log is being gripped by pikes between front and back stocks; 5. Lifting bars are being released and dropped to ground level to clear way for the moving carriage; To download this 3Mb video clip on your computer click here. 2nd video clip shows how rough cutter removes bark and sapwood layers from the log - Rough cutter can work simultaneously with fine cutter to decrease log processing time; - Rough cutter can remove up to 2¾ inches (70mm) per diameter - Speed of moving carriage can vary from 0 to 13 feet per minute (0 to 4 m/min) To download this 1.2Mb video clip on your computer click here. 3d video clip shows how fine cutter makes smooth surface - Fine cutter can work simultaneously with rough cutter to decrease log processing time; - Fine cutter also is used for notching; To download this 1.7Mb video clip on your computer click here. 4th video clip demonstrates how rough cutter makes long groove (Swedish cope) - Speed of moving carriage can vary from 0 to 13 feet per minute (0 to 4 m/min); To download this 1.6Mb video clip on your computer click here. 5th video clip demonstrates how fine cutter makes round notch - fine cutter is moving by electric motor; - speed of the moving can vary from 0 to 13 feet per minute (0 to 4 m/min); To download this 1.1Mb video clip on your computer click here.